Translate:

All-on-6 vs All-on-4 in Citrus Heights: Which Full-Arch Option Fits You?

All-on-6 vs All-on-4 in Citrus Heights: Which Full-Arch Option Fits You?

If you have lost most or all of the teeth in one jaw, or you are facing a full denture that slips and hurts, a prosthodontist will often talk about rebuilding the whole arch on implants. Two names come up in almost every conversation: All-on-4 and All-on-6. Both attach a full set of teeth to implants placed in the jaw. Both let you eat, speak, and smile without a denture. The difference is the number of implants holding the teeth up, and that number changes how chewing forces are shared, how much bone you need, and how treatment is planned.

What All-on-4 Means

All-on-4 uses four implants to support a full arch of fixed teeth. Two implants go in straight at the front of the jaw, where the bone is usually strongest. Two go in at an angle at the back, tilted to reach solid bone while avoiding the sinuses or the nerve in the lower jaw. The tilted back implants also spread the support wider, helping the bridge resist the leverage of chewing. The appeal of All-on-4 is that it often works even when bone has shrunk. Because the back implants are tilted, they can find solid bone without a graft or a sinus lift. That means fewer surgeries, a shorter treatment time, and often a lower cost than adding more implants. For many patients who have worn a denture for years and lost bone, All-on-4 is the option that makes fixed teeth possible without major grafting.

What All-on-6 Adds

All-on-6 uses six implants instead of four, with two extra implants placed in the middle of the arch. The idea is simple: more support points share the chewing load more evenly, so each implant carries less force. That can matter in the upper jaw, where the bone is softer, or for people who clench or grind their teeth, because the extra implants give the bridge more stability under heavy loads. Six implants also give the prosthodontist more flexibility in designing the teeth. With more anchors, the bridge can sometimes be made in two separate pieces instead of one long piece, which can make cleaning and future repairs easier. And if one implant ever fails years later, the remaining five can often still hold the bridge while the failed one is dealt with. With four implants, losing one is a bigger problem.

The Trade-Off: More Implants, More Bone

The catch with All-on-6 is that it needs more bone. Six implants need six good spots in the jaw, with enough width and height in each one. If the bone has shrunk, especially in the upper jaw or at the back, there may not be room for the extra implants without grafting. A bone graft or a sinus lift adds months and cost, and for some patients a surgery they would rather avoid. That is the real decision. All-on-4 was designed for mouths where bone is limited. All-on-6 was designed for mouths where there is enough bone to use it. A prosthodontist in Roseville can tell which situation you are in with in-house 3D CBCT imaging, which shows the bone in three dimensions and lets implant positions be planned before surgery. The scan, not a guess, decides how many implants your jaw can hold.

How the Two Options Compare Day to Day

Once the teeth are in place, daily life with All-on-4 and All-on-6 feels very similar. Both are fixed in place. You eat, speak, and smile with them, and most people forget they are there within a few weeks. The differences show up in the details. A full-arch bridge sits above the gum with a small gap underneath, where food can collect. Both options need daily cleaning with a water flosser or special brushes, plus regular professional maintenance. With six implants, there are two more edges to clean around. With four, the bridge is one long piece, and a repair may mean removing the whole piece. Both options have strong long-term records when planned well. The extra implants in All-on-6 give a margin of safety under heavy chewing forces, which is why prosthodontists often recommend it for strong bites, the upper jaw, or people who grind their teeth at night.

Which One Is Right for You?

There is no universal winner. The right choice depends on your bone, your bite, and your priorities. All-on-4 fits best when bone is limited, when you want to avoid grafting, when the budget is tighter, or when a shorter treatment is important. All-on-6 fits best when there is plenty of bone, when you clench or grind, or when you want the redundancy of two extra implants. The decision comes from the scan, from measuring your bite, and from talking about what matters to you. At Expert Dental Group, Dr. Leila Nikpour is a prosthodontist with more than 15 years of dentistry experience, and the practice has placed 2,500+ dental implants. Full-arch cases are planned with 3D imaging and a printed surgical guide, so implant numbers and positions are decided before surgery.

The Bottom Line

All-on-4 and All-on-6 both rebuild a full arch on implants, and both give you fixed teeth that look and feel natural. All-on-4 uses four implants and works well when bone is limited. All-on-6 uses six, spreads the chewing load wider, and adds a margin of safety when there is enough bone. A consultation with a 3D scan is the best way to find out which fits you.

Visit Expert Dental Group

Expert Dental Group is located at 5070 Foothills Blvd, Suite 2, Roseville, CA 95747. Call (916) 888-1646 to schedule your free implant consultation. Hours: Monday–Friday 9–6, Saturday 9–1.

Frequently Asked Questions

What is the difference between All-on-4 and All-on-6?

All-on-4 uses four implants to hold a full arch of fixed teeth, with the back two tilted to reach solid bone. All-on-6 uses six implants, which spreads chewing forces more evenly and adds a margin of safety, but it needs more bone.

Which is better, All-on-4 or All-on-6?

Neither is better for everyone. All-on-4 fits when bone is limited or grafting should be avoided. All-on-6 fits when there is plenty of bone, when you grind your teeth, or when the upper jaw needs extra support. A 3D scan decides which your jaw can hold.

Do All-on-4 and All-on-6 both give you teeth the same day?

Yes. In both treatments, a temporary set of fixed teeth is usually attached on the day of surgery, so you leave with teeth. The final bridge is made after the implants have healed over a few months.

Is All-on-6 more expensive than All-on-4?

Usually, yes, because it uses two more implants and takes longer to place. The difference is modest compared with the whole treatment, and the right choice is the one that fits your bone and bite, not simply the cheaper one.

How do I clean All-on-4 or All-on-6 teeth?

Both need daily cleaning under the bridge with a water flosser or special brushes, plus regular professional maintenance visits. Your prosthodontist will show you the technique for your specific bridge.