Dental Implants in Lincoln: What 2025 Research Found About Bone-Level vs Tissue-Level Implants
When you lose a tooth, a dental implant replaces the root so a crown can sit on top and look and feel like a natural tooth. But not all implants are designed the same way. Two of the main designs are bone-level and tissue-level implants, and the difference comes down to where the implant ends and where the crown’s connecting piece begins. A 2025 systematic review and meta-analysis compared the two designs, looking at how much bone is lost around each type over time. Here is what it found, and what it means for patients considering dental implants in Lincoln.
Bone-Level vs Tissue-Level: What Is the Difference?
Think of a dental implant as a small screw-shaped post placed in the jawbone. On top sits an abutment, a small connector, and on top of that sits the crown — the part you see. The two designs differ in where the join between implant and abutment sits.
A bone-level implant sits level with the bone, its join hidden below the gum line. A tissue-level implant has a smooth, polished neck that sits above the bone at gum level, so its join sits at the gum line. Both designs use the same proven materials and have been used successfully for decades. The researchers wanted to know whether one design protects the surrounding bone better over time.
What Is Marginal Bone Loss, and Why Does It Matter?
Marginal bone loss is the small amount of bone gradually lost around the top edge, or margin, of an implant after it is placed. A little settling in the first year is normal. What dentists watch for is ongoing or excessive loss, because the bone holds the implant in place — lose too much, and the implant can become less stable and may eventually fail.
That is why researchers measure marginal bone loss in millimetres: even a tenth of a millimetre can add up over many years. But a difference that shows up in statistics is not always one that matters in a patient’s mouth, and the 2025 review paid close attention to that distinction.
What the 2025 Review Examined
The research team searched two major medical databases, MEDLINE-PubMed and Scopus, for studies published through April 2024, including only studies that directly compared bone-level and tissue-level implants in patients. In the end, 21 articles were included in the review, and 17 studies contributed data to the meta-analysis, which pools results across studies into one overall estimate.
The main outcome was marginal bone loss. The researchers also looked at platform switching — using an abutment slightly narrower than the top of the implant, so the join sits a little inward from the implant’s edge — to see whether it changed the results.
What the Researchers Found
The meta-analysis found bone-level implants showed slightly greater marginal bone loss than tissue-level implants: an average difference of 0.11 millimetres — about the thickness of a sheet of paper — with a 95 percent confidence interval of 0.02 to 0.19 millimetres and a p-value of 0.01, so the difference was statistically significant. But variability between studies was high, with an I-squared value of 81 percent.
Fifteen of the 21 articles found a statistically significant difference, but the authors noted the differences were mostly not clinically relevant — real in the numbers, but so small they would rarely change how a patient feels, looks, or chews. A tenth of a millimetre is measurable on an X-ray, but it does not usually change the outcome. Bone-level implants with platform-switched abutments showed better marginal bone stability in most cases.
What This Means for You
If you are considering dental implants, this study is reassuring. Both designs work well, and the measured difference is small enough that it should not decide your treatment. The design your dentist chooses will depend on your bone, the location of the missing tooth, your gum thickness, and what the final crown needs to look like.
A tissue-level implant may suit cases with plenty of healthy gum tissue, while a bone-level implant may be preferred near a visible front tooth. What matters far more than the design label is the planning: accurate 3D imaging, careful placement, a well-designed crown, and regular check-ups afterward.
How Your Prosthodontist Chooses the Right Implant Design
At Expert Dental Group, Dr. Leila Nikpour is a prosthodontist in Roseville who plans every implant case with in-house 3D CBCT imaging, so the bone, gum tissue, and best implant position are mapped before treatment begins. If you are exploring dental implants in Lincoln, ask at your consultation about bone-level and tissue-level designs and which fits your case — reading about dental implants first helps you ask better questions. Dr. Nikpour brings more than 15 years of dentistry experience, has placed 2,500+ dental implants, and completed a one-year implantology fellowship in France.
Visit Expert Dental Group
Expert Dental Group is located at 5070 Foothills Blvd, Suite 2, Roseville, CA 95747. Call (916) 888-1646 to schedule your consultation. Hours: Monday–Friday 9–6, Saturday 9–1.
Frequently Asked Questions
What is the difference between bone-level and tissue-level implants?
A bone-level implant sits with its top edge level with the jawbone, and the join to the abutment is below the gum line. A tissue-level implant has a smooth polished neck that sits above the bone at the gum line, so the join to the abutment is at the level of the gum tissue. Both designs are well proven.
Does one type lose more bone than the other?
A 2025 meta-analysis of 17 studies found bone-level implants showed slightly greater marginal bone loss than tissue-level implants, by an average of 0.11 millimetres. The researchers noted the difference was mostly not clinically relevant, meaning it would rarely change the outcome for a patient.
What is platform switching, and does it help?
Platform switching means using an abutment slightly narrower than the top of the implant, so the join sits inward from the implant edge. The 2025 review found that bone-level implants with platform-switched abutments showed better marginal bone stability in most cases.
What is marginal bone loss?
Marginal bone loss is the gradual loss of bone around the top edge of an implant after placement. A small amount in the first year is normal. Dentists monitor it on X-rays because the bone holds the implant in place, and excessive loss can affect long-term stability.
How do I know which implant design is right for me?
The choice depends on your bone, gum thickness, the location of the missing tooth, and how the final crown should look. Your prosthodontist will evaluate these factors with 3D imaging and discuss the best design for your case at a consultation.
References
Elkattan A, Torres-Velázquez N, Blázquez-Hinarejos M, Egido-Moreno S, Ayuso-Montero R, Roselló-Llabrés X, López-López J. Marginal Bone Loss Around Bone-Level and Tissue-Level Implants: A Systematic Review and Meta-Analysis. Applied Sciences. 2025;15(5):2286. doi:
10.3390/app15052286. https://doi.org/10.3390/app15052286
